![GVI-F-Series-Floating-Ball-Valves--Gator-Valve-and-Actuator-Broussard-LA GVI-F-Series-Floating-Ball-Valves Gator Valve and Actuator Broussard LA](https://gatorvalve.com/wp-content/uploads/2019/05/GVI-F-Series-Floating-Ball-Valves-Gator-Valve-and-Actuator-Broussard-LA-1.jpg)
“F” Series Ball Valves
The F Series ball valves.
- Sizes: 2″ through 6″
- Class: 150, 300, 600
- Body material ASTM A216 grade WCC
- 316 stainless steel trim “standard”
- Grease fitting in stem for lubrication
- Locking device “standard”
- Viton seal kits “standard”
- Nylon seat seals “standard”
- Available in full or regular port
- Mounting pad for actuation
- Fire-safe design
- Every valve is hydro-tested
![GVI-G4-Trunnion-ball-valves-with-handles-Gator-Valve-and-Actuator-Broussard-LA Gator-Valve-and-Actuators-oilfield-valves-Broussard-LA remanufactuing services for oilfield valves](https://gatorvalve.com/wp-content/uploads/2019/05/GVI-G4-Trunnion-ball-valves-with-handles-Gator-Valve-and-Actuator-Broussard-LA-1.jpg)
G-4 Trunnion Series Ball Valves
The G-4 Trunnion Series features both Top and Side Entry configurations.
- Sizes: 2″ through 8″
- Class: 600
- Sizes: 6″ and 8″
- Class: 150 and 300
- Body material ASTM A216 grade WCC
- Field repairable top entry Trunnion design
- Available in carbon steel or stainless steel trim
- Double block and bleed “standard”
- Grease fitting in bonnet for stem lubrication
- Nylon seat seals “standard”
- Nitrile O-ring seals “standard”
- Available in full or regular port
- Fire-safe design
- Every valve is hydro-tested
![GVI-Swing-Check-Valves-Gator-Valve-and-Actuator-Broussard-LA GVI-Swing-Check-Valves Gator Valve and Actuator Broussard LA](https://gatorvalve.com/wp-content/uploads/2019/05/GVI-Swing-Check-Valves-Gator-Valve-and-Actuator-Broussard-LA-1.jpg)
Check Valves
The check valve features our non-removable seat in Series 90 and the removable seat in Series 91.
- Sizes: 2″ through 8″
- Class: 150, 300, 600
- Body material is ASTM A216 grade WCC
- Field repairable top entry design
- Easy field identification
- Series 90: Grade 8 capscrews on bonnet
- Series 91: B7 plated studs and nuts on bonnet
- 316 stainless steel trim “standard”
- Thru-conduit design
- 2″ – 6″ vertical flow up or horizontal installation
- 1/2″ NPT tap in bonnet
- Every valve is hydro-tested